Complete shop and distributor of locating equipment (magnetic locators, pipe and cable locators, fisher leak detectors, sub-surface imaging. Measuring equipment (laser distance meters, measuring wheels, fiberglass tapes, steel tapes, pocket tapes. Tripods (aluminum, wood, fiberglass, machine control, robotics, tripods adaptors and accessories. Level rods, level poles, aluminum and fiberglass rods, direct reading rods, prism and range poles in Canada.

Phoenix-MS
Customer Service: 1-866-767-5888
  Home     About Us     Contact Us  
  Specials     Rentals     Used Products  
Quick Search
or
search
  • banner
  • banner
  • banner
  • banner
  • banner
  • banner
Product Categories

Product
 
Ziplevel Pro 2000


$1,295.00


Downloads:
Ziplevel User Guide

 Ziplevel Pro-2000 LASERLESS DIGITAL ELEVATIONS

Ziplevel CONCEPT:

ZIPLEVEL® is a high precision pressurized hydrostatic altimeter. It works much like an aircraft altimeter that measures the weight of the air above it except that ZIPLEVEL does not use the atmosphere to measure elevation. Instead, ZIPLEVEL is a pressurized system that measures the weight of a proprietary liquid sealed within its Cord relative to a Reference Cell in the hub of its reel. This makes ZIPLEVEL 10,000 times as precise as an aircraft altimeter and immune from both barometric pressure and altitude changes. Its internal pressure prevents bubbles from desorbing from its liquid when under vacuum when the Module is above the Base Unit and is one of our powerful patented features.


ZIPLEVEL® will measure over a 200' (60m) circle and 40' (12m) vertically on one setup with 0.050 internal precision. Its revolutionary High Precision functions will measure over 4' (121.9cm) vertically with paper thin 0.005 (0.1mm) internal precision. ZIPLEVEL has 16 powerful built-in functions and a PC Serial port. The job site rugged ZIPLEVEL will operate from -22F (-30C) to 158F ( 70C) for up to a year of daily use on a single 9V battery.

Why ZIPLEVEL® is Replacing Rotary Lasers . . .

Much like a water level, the builder’s level and rotary laser simply create a flat reference plane that you hope is reasonably level if the instrument hasn’t been jarred out of factory calibration enroute to the job site. On the job where profits are measured in time, conventional levels make you work long and hard. Both the set up and pack up require five to ten minutes each due to tedious coupling, calibration and decoupling of delicate components while jockeying with one or more protective cases. This overhead often causes workers to avoid checking jobs leading to costly errors. To further complicate your work, the real world has hills, valleys, grading, excavations and visual obstructions. If you want to measure a change in elevation you must read and subtract numbers from a rod where larger readings mean lower elevations and smaller readings mean higher elevations. Visual obstructions require multiple setups, differential leveling and of course more error inducing, counter-intuitive rod readings and math. In all but rare exceptions, your work is done at a different elevation than the instrument height so you must have a rod man locate a laser beam while you, for example, adjust concrete forms far below. This is not the advertised one man operation . . . and don’t forget, you must frequently charge or change both laser and sensor batteries.

The revolutionary ZIPLEVEL® PRO-2000 is a high precision altimeter that not only levels but reads elevations in unmistakably clear digits while solving all of the foregoing problems. Savings start with the two second set up and five second pack up time so there is no excuse to avoid checking a critical measurement. A press of the Measurement Module Zero key anywhere within the 40’ vertical set up range sets an infinite size level benchmark plane. It’s like setting a laser instrument height at the elevation where you might wish to level. ZIPLEVEL adapts to you rather than making you adapt to a laser with a rod and sensor. You can instantly level or adjust forms by yourself for true one man operation. Elevations are displayed directly in your favorite scale with positive digits above and negative below your benchmark with 0.050 inches precision without math or line-of-sight. Because ZIPLEVEL technology is immune from tilted level plane problems, there is no need for factory calibration and no error with distance. In fact, ZIPLEVEL’s powerful Carry Function lets you measure over any distance or elevation on earth without tabulation or math. Our new dual range ZIPLEVEL can now detect the thickness of a sheet of paper with 0.005” (0.1 mm) internal precision for measurements never before possible. As a bonus, the rugged ZIPLEVEL runs for up to a year of typical daily use on a single 9V battery over temperatures of -22F(-30C) to 158F ( 70C) with storage to -40F (-40C), has 16 powerful built-in functions and a PC Serial Port.

With tens of thousands sold worldwide since 1996, a one year warranty (two year pro-rata on hydro-pneumatics) and a 30 day money back guarantee, why not join the measurement revolution? Now you can enter real world of the 21st Century with the affordable ZIPLEVEL® PRO-2000 and save time, reduce errors and cut costs.

 

Watch the Ziplevel in action on YouTube:   http://www.youtube.com/watch?v=iqtVQ0yRAEk&feature=youtu.be 

 



logo
logo
logo
logo
logo
logo
logo
logo
logo
logo
logo
logo
logo
logo
logo
logo
logo
logo
logo
logo
logo

Lasers, Receivers and Ziplevel Construction Instruments and Surveying Equipment Ziplevel

Sales, rental and services for laser instruments (interior, exterior, grade, pipe, universal receivers, line, dot and ziplevel). Optical instruments (transit and automatic levels, digital theodolites, hand and digital levels, pipe laser alignment transits, precision plumb instruments). Total stations (conventional, reflectorless, robotic, prisms, accessories). Data collectors (carlson, tds data, microsurvey, juniper). Survey grade gps solutions (rtk, radios, cables and accessories, gis software/hardware, ikegps & ge mapsight). Fieldhawk radio kits. Machine control solutions (receivers, digging, grading and paving solutions, laser grading box attachments).

Phone: 905-482-0340 / Toll Free: 1-866-767-5888 - 150 Rivermede Road, Unit#1. Concord, Ontario L4K 3M8 Canada
We serve Aurora, Barrie, Georgina, King, Markham, Newmarket, Orilla, Richmond Hill, Vaughan, Toronto and all canadian areas with worldwide shipping.
©2017 Phoenix Measurement Solutions Privacy policy    Terms and conditions Web Design and Development by Superior Web Solutions